Home  >  Straight Pipe Burners

 

  • Straight Pipe Burner
  • Dual Pipe Burners with Grease Shields

Straight Pipe Burners    

are stocked by  CustomPipeBurners.com in lengths of 32", 44", 56", and 68" measure from one end of the pipe to the opposite end with the pipe threads.  These pipe burners are sometimes called stick burners or tube burners.  We custom make longer lengths, fabricate square pipe burners, radial spoke burners, and custom gas manifolds  the way you want them.  We have machined thousands of custom pipe burners...we can make one for you.

 

PBM125 - Straight Pipe Burner -Support Leg Option

  PBM125

PBM125 - Straight Pipe Burner 1.25" ID in 32", 44", 56", or 68" lengths. Support LEGS available as an option.

♦  32", 44", 56", and 68" standard pipe burners lengths. 

♦  Constructed with a permanently welded plate steel disk at one end and our 1.25" NPT threaded HPMAX-1 venturi at the opposite end. 

♦  Pipes measure 1.25"ID/1.5"OD with a 3/16" wall thickness. 

♦  Eight inches of pipe near the venturi is used as the "throat" of the burner and does not have any holes for flames. 

♦  A 32" burner has 24" of flames, 44" burner has 36" of flames, 56" burner has 48" of flames, and a 68" burner has 60" of flames.  

Indicate your fuel preference of natural gas, low pressure propane, or high pressure propane in the COMMENTS section of the shopping cart. Propane is expensive so don't waste propane using a pipe burner which gives an inefficient yellow flame. 

You can provide support of the assembly by using a cradle made of a length of 1.5" angle iron. Such a cradle support permits easy removal for maintenance. These pipe burners are designed to give even, high-heat blue flames throughout the length of the pipe. They are easy to light.


♦  With Low Pressure use we suggest the COM5 regulator/hose.
♦  With High Pressure use we suggest the COM3 regulator/hose.
♦  Available with an Optional Needle Control Valve with integral Orifice.
  CustomPipeBurners.com can weld permanent 1/2" diameter round supporting legs along the length of any pipe burner. Order the unit with "LEGS" at the end of the part number, (shown in drop-down order box to the right). 

Free shipping to all 48 contiguous U.S. States.


                                  Weight    Weight w/LEGS
PBM125-32"        10#                  14#
PBM125-44"        12#                  18#
PBM125-56"        15#                  22#
PBM125-68"        18#                  26#

Free shipping to the 48 contiguous U.S. States.



  • Straight Pipe Burner with CVO250
    Straight Pipe Burner with Optional CVO250 Control Valve Orifice
  • Straight Pipe Burner with Optional Legs and CVO250
    Straight Pipe Burner with Optional Legs and CVO250
  • Straight Pipe Burner with Legs and CVO250
    Straight Pipe Burner with Optional Legs and CVO250
  • 32in Straight Pipe Burner with Pilot Light Assembly   32in Straight Pipe Burner with Pilot Light Assembly
    Pilot Light Assembly is available as an Option at additional charge

 

$219.95

 

 

PBMG125 - Straight Pipe Burner and Integral Grease Shield - LEGS Supports Are Optional

  PBMG125

PBMG125 - Straight Gas Pipe Burner, 1.25" ID in 32", 44", 56", or 68" lengths, with a permanently welded 3" high grease shield. Optional LEGS

In every pipe burner there will be 8" of pipe without gas holes for air and gas mixing after the venturi:
 

      32" pipe burner has 24" of flames  
      44" pipe burner has 36" of flames
      56" pipe burner has 48" of flames
      68" pipe burner has 60" of flames
 
A standard stocked pipe burner can be reduced in length to fit a custom length required by a customer.  Length reductions are made to that part of the pipe burner with the flame holes.  See the area below for how to request a custom length pipe burner.
Specify your fuel preference of natural gas, low pressure propane, or high pressure propane in the Comments section in the shopping cart.

♦  For Low Pressure use we suggest a COM5 regulator/hose.
♦  For High Pressure use we suggest a COM3 regulator/hose.
♦  Available with an Optional Needle Control Valve with integral Orifice
♦  CustomPipeBurners.com can weld permanent 1/2" diameter round legs along the length of your pipe burner. Order the unit with "LEGS" at the end of the part number, as shown in the drop down box to the right.  

Free shipping to all the 48 contiguous U.S. States.


                        Wt.w/Grease Shield  Wt.w/Grease Shield & LEGS
PBMG125-32"             12#                                   13#
PBMG125-44"             16#                                   18#
PBMG125-56"             20#                                   22#
PBMG125-68"             24#                                   26#

Free shipping to the 48 contiguous U.S. States.



  • (12) Straight Pipe Burners with Grease Shields and one Gas Manifold
    (12) Straight Pipe Burners with Grease Shields in One Gas Manifold
  • Dual Pipe Burners with Grease Shields
    Dual Pipe Burners with Grease Shields
  • Straight Pipe Burner with Grease Shield and CVO250
    Straight Pipe Burner with Grease Shield and Optional CVO250
  • PIpe Burner with Grease Shield and Legs   Pipe Burner with Grease Shield and Legs
    Straight Pipe Burner with Grease Shield and Optional Support Legs

 

$249.95

 

 

PBM-MOD - Custom Length Pipe Burner Modification

  PBM-MOD

PBM-MOD - Custom Length Pipe Burner Modification


There is a $25.00 charge to make custom length modifications of pipe burners (to shorten them from one of the stocked sizes).  

If as an example, a 43" length pipe burner is required, then purchase a 44" stocked unit (with or without a grease shield) and we will shorten the pipe and weld a 1/8" thick round steel plate on the end.  Reductions in length come from the flame length section of the pipe and not the undrilled "throat" region near the venturi. 

$25.00

 

 

CVO250 - Control Valve  Orifice Fitting  , 1/4" MNPT x 3/8" MGF

  CVO250

CVO250 - Control Valve Orifice, 1/4" MNPT, #61 Orifice

The CVO250 gas flow needle valve control valve orifice allows you to fine control the level of the pipe burner flames at the venturi rather than back at the propane tank regulator or the natural gas source. If you purchase a Control Valve Orifice at the time you purchase any pipe burner we will drill it to the proper orifice size and install it on your pipe burner at no extra charge. The default orifice size is #61. This control valve orifice fitting will work on practically any burner if the orifice is drilled to the proper size.   


Specify your fuel preference of: natural gas, low pressure propane, or high pressure propane in the Comments section in the shopping cart.   

Wt.  2.5 oz.   Free shipping to the 48 contiguous U.S. States.
 

  • CVO250 on a Straight Pipe Burner
    CVO250 needle valve control on a straight pipe burner
  • CVO250 in a Pipe Burner Venturi
    CVO250 Install in a Pipe Burner Venturi

$19.95

 

 

If you have a need for a custom pipe burner setup we encourage you to email us a drawing with dimensions and any photographs of what you plan to install the gas pipe burner(s) in. Email: info@CustomPipeBurners.com.  A pipe burner specialist will study the materials and call you back to discuss your project. This approach allows our gas specialists to think about your project for a bit before the conversation is started with the customer; which invariably saves everyone's time. Allowing the gas pipe burner specialist to think about your project a bit quite often allows the specialist to formulate some alternative solutions which may save you money.  Be aware that we can also install custom support legs, grease shields, pilot lights, manifolds, and automatic gas controls for your gas pipe burner(s).  We ship free to the 48 contiguous U.S. States including popular destinations like New Jersey, North Carolina, South Carolina, Tennessee, and Georgia. All Straight Gas Pipe Burners  have eight inches of gas pipe without holes immediately after the venturi. This area is for the optimum mixing of the gas and air.